How to set up your FLIR FX camera
5
12. Select your Wi-Fi network from the list. Enter the password for your Wi-Fi network
and tap Connect.
13. The LED will flash while the camera is connecting to the Wi-Fi network. When it
finishes connecting, it will glow green and the app will display the screen below.
14. Tap Done. Tap on the camera in the camera list to connect to the video.
NOTE
If you enter the wrong Wi-Fi password, the camera will attempt to connect to the network for 60 sec-
onds. If it cannot connect within that time, it will return to Direct Mode and the
LED will turn on.
Once the
LED is glowing, retry the setup.
To Next Page
Loading...
Need help?
General
