How to change your camera’s password13
6. Select your Wi-Fi network from the list and then enter the password for your Wi-Fi
network. The camera will connect to the new Wi-Fi network. The
LED will glow
when it is successfully connected.
NOTE
If the camera cannot connect to the network after 60 seconds because the password entered was
incorrect or the router is out of range, the camera will return to Direct Mode. After the
LED
turns on, repeat the steps above starting from step 1.
7. Tap Done to finish the password reset process. You can now connect to your camera
over the Internet on your smartphone or tablet.
#LX400067; r.27354/27358; en-US
67
To Next Page
Loading...
Need help?
General
