Setting motion detection alerts and recording
17
6. A grid overlay opens over the video. By default, the entire video area is enabled for
motion detection. To configure SmartZone:
• Tap inside the grid to configure. Activated areas will turn blue.
• Tap Clear to reset SmartZones to the default setting (motion activated
everywhere).
• Tap Cancel to exit with no changes.
• Tap Save to save settings and return to the settings menu.
7. Tap Save at the top of the settings menu to save your changes.
To set up motion detection alerts and recording (tablets):
1. Tap and drag the desired camera into one of the four viewing areas. You can view up
to four cameras at the same time.
#LX400067; r.27354/27358; en-US
79
To Next Page
Loading...
