FLIR M500 - Settings Menu Options

M500 Web Browser Interface
432-0012-01-12 Version 110 25
The user log in can only use the Live Video
page and controls.
In the lower right of the page there is a frame
rate selector. This selector allows the user to
change the rate at which the frames are
displayed in the browser from the default 8 fps
up to 16 fps. This rate controls the user’s own
web browser only, and does not affect video
streams to other users.
Help
At the top of the page, the Help menu shows
software version information. This page has information about the camera software revision
numbers. If it is necessary to contact FLIR Technical Support for assistance, it will be helpful to
have the information from this page on hand.
Log out
Use this button to disconnect from the camera and stop the display of the video stream. If a web
session is inactive for 20 minutes, it will be stopped.
Toggle Camera/PC time
Click on the icon to view either the PC time or the camera time.
Camera Control and Status
In the lower left of the screen are two indicator lights: Control and
Status. Initially the Control light is off indicating the user is not able
to control the camera. When multiple users are connected to a camera, only one user at a time
can issue commands to the camera. If another user has control of the camera, the Control light is
yellow. Request control of the camera by clicking on the yellow or black light, or simply by sending
a command to the camera. Be patient, there may be a slight delay between each command while
the browser waits for a response from the camera.
When the cursor is moved over the video, a snapshot button is available to capture a .jpg file of the
video image. The browser will provide prompts to save the file.
Web Control Panel
The control buttons on the right side of the page provide a way to control the camera in a limited
number of ways. When the mouse cursor is positioned over a button, a tool tip is displayed.
Each camera will generally have different buttons depending on the available functions.
Figure 4-2: Live Video Page (user log in)
Go to Preset position.
See “Setup->Surveillance->Scan
List” on page 31.
IR Control Keypad Visible Control Keypad
August 2020