M500 Web Browser Interface
432-0012-01-12 Version 110 27
Home
Click moves the camera to the Home position; Click and Hold sets the current pan and tilt
position of the camera as the Home position.
Function Keys
When selected, the keypad changes to an OSD control panel. Select the back arrow to
return to the main keypad.
Use the OSD menu keypad to navigate through the OSD menus and make selections.
Refer to the M500 Operator’s Manual for descriptions of the menu functions.
When using the OSD menu from the Web
page, the virtual joystick is still enabled to
drive the camera pan and tilt. Use the Web
Control Panel to navigate through the OSD
menu and make selections. Refer to the
M500 Operator’s Manual for descriptions of
the menu functions.
Click to access
next menu
OSD Menu Keypad
OSD Menu Keypad
Display OSD menu
Move up through OSD
Exit current OSD function
Move left through OSD
Enter
Move right through OSD
Move down through OSD
To Next Page
Loading...
