Enabling Universal Plug and Play (UPnP)
432-0012-01-12 Version 110 42
4. Select the Universal Plug and Play check box.
5. Click OK, and then click Next in the Windows Components Wizard. The Windows XP
installation CD may be required.
See if any UPnP-enabled devices exist on your network by opening My Network Places. If there
are UPnP devices on the local network, they will appear here with a generic icon based on the
device type. In the future when a UPnP device is installed on the network, a notifying icon will
appear briefly in the System Tray. When you see this icon, go to My Network Places to view the
new device. Double-click on the icon to bring up the Web page.
To Next Page
Loading...
