FLIR MR59 - Introduction; Key Features; Description; Meter Description

FLIR MR59 USER MANUAL Document Identifier: MR59-en-US_AB
4
2. Introduction
Thank you for selecting the FLIR MR59 Ball Probe Moisture Meter with Bluetooth®. This
instrument detects moisture in wood and other building materials and transmits readings
to a remotely paired smart device. This device is shipped fully tested and calibrated and,
with proper use, will provide years of reliable service.
2.1 Key Features
 Non-invasive pinless moisture measurements for wood and other building materials
including plywood, drywall, oriented strand board (OSB), brick, cement screed,
concrete, cement mortar, anhydrite screed, lime mortar, and plaster
 Bluetooth® data transmission
 Firmware upgrades via micro USB port located in battery compartment
 Maximum/Minimum readings
 High moisture Alarm audible alert
 LED Worklight
 Backlit LCD
 Data Hold
 Battery powered (1 x 9V battery)
 Automatic Power OFF after 30 minutes
3. Description
3.1 Meter Description
1. Moisture sensor (capacitance type)
2. Backlit LCD
3. Data Hold / MIN-MAX clear button
4. Worklight ON/OFF and up arrow
button
5. Backlight ON/OFF and down arrow
button
6. Power button
7. Alarm enable/Alarm threshold button
8. Worklight
9. Tripod mount
10. Battery/USB port compartment