4.7 High Moisture Audible Alarm
The MR59 beeps when the moisture reading exceeds the high alarm limit. To set the
alarm limit, short press the
SET button and use the arrow buttons to set the value.
To exit the alarm programming screen, short press the SET button again. To
enable/disable the audible alarm, long press the
SET button. When the alarm is
enabled (default), the alarm bell icon appears. The alarm limit is set to ‘20’ by default.
4.8 Bluetooth® Transmission Basics
To connect to a remote device running FLIR Tools™, turn on the remote device and start
the FLIR Tools™ application. Open Instruments, and search for the MR59 (the MR59
must be ON). Tap to connect to the MR59.
When connected to a remote device, the MR59 displays the Bluetooth® and the
transmission icons and automatically transmits moisture data.
When you switch the meter ON, the Bluetooth® and transmission icons will be OFF.
They appear only when you pair the MR59 with a remote device.
5. Bluetooth® Technical Details
When connected to a device running the FLIR Tools™ mobile app, the MR59 (using the
METERLiNK® protocol) continually sends readings for live display on the remote device.
When connected to a compatible FLIR camera that supports BLE (Bluetooth® Low
Energy), the MR59 continually sends meter readings for live display on the camera
screen. Download the FLIR Tools™ mobile app from the Google Play™ store, the Apple
App store, or here: https://www.flir.com/products/flir-tools-app/
1. When successful communication between the meter and a remote device or FLIR
camera is established, the Bluetooth® icon and the transmission icon appear
on the meter display.
2. Refer to the FLIR Tools™ help utility (in the mobile app) for detailed information and
tutorials regarding the FLIR Tools™ application.
3. Refer to Section 4.8 Bluetooth® Transmission Basics for using the meter to transmit
data via Bluetooth®.
To Next Page
Loading...
