427-0075-01-12 Revision 140 October 2019 47
This document does not contain any export-controlled information.
Basic Operation and Configuration
Sensor > Devices > Pan & Tilt
Scroll down to select an action the camera will perform at startup (power cycle or server reset).
Sensor > Modules > Video
By default, four video streams are enabled for the camera: Video 0, Video 1, Video 2, and Video 3.
The streams are available for viewing from a client program such as FLIR Latitude, a stand-alone
video player, or a third-party VMS including ONVIF systems. By default, Video 0 and Video 1 are
from the visible camera, while Video 2 and Video 3 are from the IR sensor.
Adjustments to these settings should only be made by someone trained with thermal cameras
and a thorough understanding of how the various settings affect the image.
Haphazard changes can lead to image problems including a complete loss of video.
Scroll down
to Save
Select an action
from the menu
To Next Page
Loading...
