Name: FLIR T640
Brand: FLIR
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Handling the camera

13.1 Charging the battery

Note You must charge the battery for 4 hours before you start using the camera for the

first time.

13.1.1 Using the power supply to charge the battery

13.1.1.1 Procedure

Follow this procedure:

1. Connect the power supply cable plug to the power connector on the camera.

2. Connect the power supply mains-electricity plug to a mains socket.

3. Disconnect the power supply cable plug when the green light of the battery condition

LED indicator is continuous.

13.1.2 Using the stand-alone battery charger to charge the battery

13.1.2.1 Explanation

Type of signal Explanation

The blue LED flashes. The battery is being charged.

The blue LED glows continuous. The battery is fully charged.

13.1.2.2 Procedure

Follow this procedure:

1. Put the battery in the battery charger.

2. Connect the power supply cable plug to the connector on the battery charger.

3. Connect the power supply mains-electricity plug to a mains socket.

4. Disconnect the power supply cable plug when the blue LED on the battery charger is

continuous.

13.2 Turning on the camera

13.2.1 Procedure

Follow this procedure:

1. To turn on the camera, push and release the

button.

13.3 Turning off the camera

13.3.1 Procedure

Follow this procedure:

1. To turn off the camera, push and hold the

button for more than 0.2 second.

#T559880; r. AK/36075/36075; en-US

FLIR T640 Specifications

General

FLIR T640 User Manual

Other manuals for FLIR T640