Name: FLIR T640
Brand: FLIR
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Thermographic measurement techniques31

31.4 Distance

The distance is the distance between the object and the front lens of the camera. This

parameter is used to compensate for the following two facts:

• That radiation from the target is absorbed by the atmosphere between the object and

the camera.

• That radiation from the atmosphere itself is detected by the camera.

31.5 Relative humidity

The camera can also compensate for the fact that the transmittance is also dependent

on the relative humidity of the atmosphere. To do this set the relative humidity to the cor-

rect value. For short distances and normal humidity the relative humidity can normally be

left at a default value of 50%.

31.6 Other parameters

In addition, some cameras and analysis programs from FLIR Systems allow you to com-

pensate for the following parameters:

• Atmospheric temperature – i.e. the temperature of the atmosphere between the cam-

era and the target

• External optics temperature – i.e. the temperature of any external lenses or windows

used in front of the camera

• External optics transmittance – i.e. the transmission of any external lenses or windows

used in front of the camera

#T559880; r. AK/36075/36075; en-US

471

FLIR T640 Specifications

General

FLIR T640 User Manual

Other manuals for FLIR T640