2
Figure 1
To the owner…
Congratulations on receiving your
FLOMEC® Industrial Grade Turbine.
We are pleased to provide you with a
product designed to give you maximum
reliability and efficiency.
Our business is the design, manufac-
ture, and marketing of liquid handling,
agricultural, and recreational products.
We succeed because we provide cus-
tomers with innovative, reliable, safe,
timely, and competitively priced prod-
ucts. We pride ourselves in conducting
our business with integrity and profes-
sionalism.
We are proud to provide you with a
quality product and the support you
need to obtain years of safe, dependa-
ble service.
Victor Lukic, President
Great Plains Industries, Inc.
GENERAL INFORMATION
This manual will assist you in installing
and maintaining your FLOMEC® In-
dustrial Grade turbine housing (See
Figure 1). Information on electronics
are contained in their respective manu-
als. Please reference those as neces-
sary.
TABLE OF CONTENTS
General Information....................... 2
Installation................................ .... 4
Operation....................................... 6
Maintenance.................................. 6
Troubleshooting............................. 8
Model Number Chart..................... 9
Specifications............................... 10
Aluminum................................. 10
Stainless Steel......................... 12
ANSI Flange Fittings................ 14
Tri-Clover® Flange Fittings...... 16
Illustrated Parts Drawings............ 18
Service......................................... 21
Agency Approvals Table.............. 22
For best results, take the time to fully
acquaint yourself with all information
about all components of your
FLOMEC® Electronic Digital Metering
System prior to installation and use. If
you need assistance, contact the dis-
tributor from whom you purchased your
turbine.
This symbol is used throughout
the manual to call your attention
to safety messages.
Warnings alert you
to the potential for
personal injury.
Cautions call your
attention to prac-
tices or procedures
which may damage
your equipment.
Notes give information that can im-
prove efficiency of operations.
It is your responsibility to make sure
that all operators have access to ade-
quate instructions about safe operating
and maintenance procedures.
To Next Page
Loading...
Need help?
General
