DMX/DMXD/DMXH/DMXDDMX/DMXD/DMXH/DMXD
INSTRUCTIONS INSTRUCTIONS
INTRODUCTION INTRODUCTION
These Instructions must always be keptThese Instructions must always be kept
close to product's operating location or directlyclose to product's operating location or directly
with the product.with the product.
Flowserve's products are designed, developed andFlowserve's products are designed, developed and
manufactured with state-of-the-art technologies inmanufactured with state-of-the-art technologies in
modern facilities. The unit is produced with great caremodern facilities. The unit is produced with great care
and commitment to continuous quality control, utilisingand commitment to continuous quality control, utilising
sophisticated quality techniques, and safetysophisticated quality techniques, and safety
requirements.requirements.
Flowserve is committed to continuous qualityFlowserve is committed to continuous quality
improvement and being at service for any furtherimprovement and being at service for any further
information about the product in its installation andinformation about the product in its installation and
operation or about its support products, repair andoperation or about its support products, repair and
diagnostic services.diagnostic services.
These instructions are intended to facilitateThese instructions are intended to facilitate
familiarization with the product and its permitted use.familiarization with the product and its permitted use.
Operating the product in compliance with theseOperating the product in compliance with these
instructions is important to help ensure reliability ininstructions is important to help ensure reliability in
service and avoid risks. The instructions may not takeservice and avoid risks. The instructions may not take
into account local regulations; ensure such regulationsinto account local regulations; ensure such regulations
are observed by all, including those installing theare observed by all, including those installing the
product. Always coordinate repair activity withproduct. Always coordinate repair activity with
operations personnel, and follow all plant safetyoperations personnel, and follow all plant safety
requirements and applicable safety and healthrequirements and applicable safety and health
laws/regulations.laws/regulations.
These instructions must be read prior toThese instructions must be read prior to
installing, operating, using and maintaining theinstalling, operating, using and maintaining the
equipment in any region worldwide. Theequipment in any region worldwide. The
equipment must not be put into service until allequipment must not be put into service until all
the conditions relating to safety, noted in thethe conditions relating to safety, noted in the
instructions, have instructions, have
Failure to followFailure to follow
and apply the present user instructions isand apply the present user instructions is
considered to be misuse. Personal injury,considered to be misuse. Personal injury,
product damage, delay or failure caused byproduct damage, delay or failure caused by
misuse are not covered by the Flowservemisuse are not covered by the Flowserve
It is a legal requirement that machinery andIt is a legal requirement that machinery and
equipment put into service within certain regions ofequipment put into service within certain regions of
the world shall conform with the applicable CEthe world shall conform with the applicable CE
Marking Directives covering Machinery and, whereMarking Directives covering Machinery and, where
applicable, Low Voltage Equipment, Electromagneticapplicable, Low Voltage Equipment, Electromagnetic
Compatibility (EMC), Pressure Equipment DirectiveCompatibility (EMC), Pressure Equipment Directive
(PED) and Equipment for Potentially Explosive(PED) and Equipment for Potentially Explosive
Atmospheres (ATEX).Atmospheres (ATEX).
Where applicable, the Directives and any additionalWhere applicable, the Directives and any additional
Approvals, cover important safety aspects relating toApprovals, cover important safety aspects relating to
machinery and equipment and the satisfactorymachinery and equipment and the satisfactory
provision of technical documents and safetyprovision of technical documents and safety
instructions. Where applicable this documentinstructions. Where applicable this document
incorporates information relevant to these Directivesincorporates information relevant to these Directives
and Approvals. To confirm the Approvals applyingand Approvals. To confirm the Approvals applying
and if the product is CE marked, check the serialand if the product is CE marked, check the serial
number plate markings and the Certification, seenumber plate markings and the Certification, see
Certification.Certification.
1.3 Disclaimer1.3 Disclaimer
Information in these User Instructions is believedInformation in these User Instructions is believed
to be reliable. In spite of all the efforts ofto be reliable. In spite of all the efforts of
Flowserve to provide sound and all necessaryFlowserve to provide sound and all necessary
information the content of this manual mayinformation the content of this manual may
appear insufficient and is not guaranteed byappear insufficient and is not guaranteed by
Flowserve as to its completeness or accuracyFlowserve as to its completeness or accuracy
Flowserve manufactures products to exactingFlowserve manufactures products to exacting
International Quality Management System StandardsInternational Quality Management System Standards
as certified and audited by external Qualityas certified and audited by external Quality
Assurance organisations. Genuine parts andAssurance organisations. Genuine parts and
accessories have been designed, tested andaccessories have been designed, tested and
incorporated into the products to help ensureincorporated into the products to help ensure
continued product quality and performance in use. Ascontinued product quality and performance in use. As
Flowserve cannot test parts and accessories sourcedFlowserve cannot test parts and accessories sourced
from other vendors the incorrect incorporation of suchfrom other vendors the incorrect incorporation of such
parts and accessories may adversely affect theparts and accessories may adversely affect the
performance and safety features of the products. Theperformance and safety features of the products. The
failure to properly select, install or use authorisedfailure to properly select, install or use authorised
Flowserve parts and accessories is considered to beFlowserve parts and accessories is considered to be
misuse. Damage or failure caused by misuse is notmisuse. Damage or failure caused by misuse is not
covered by Flowserve's warranty. In addition, anycovered by Flowserve's warranty. In addition, any
modification of Flowserve products or removal ofmodification of Flowserve products or removal of
original components may impair the safety of theseoriginal components may impair the safety of these
products in their use.products in their use.
1.4 Copyright1.4 Copyright
All rights reserved. No part of these instructions mayAll rights reserved. No part of these instructions may
be reproduced, stored in a retrieval system orbe reproduced, stored in a retrieval system or
transmitted in any form or by any means without priortransmitted in any form or by any means without prior
permission of Flowserve Corporation.permission of Flowserve Corporation.
This product has been selected to meet theThis product has been selected to meet the
specifications of your specifications of your
purchaser order. purchaser order.
acknowledgement of these conditions has been sentacknowledgement of these conditions has been sent
separately to the Purchaser. separately to the Purchaser.
copy should be keptcopy should be kept
with these instructions.with these instructions.
The product must not be operated beyondThe product must not be operated beyond
the parameters specified for the application. Ifthe parameters specified for the application. If
To Next Page
Loading...
Need help?
General
