To Next PageTo Next Page
Need help?Do you have a question about the Flowserve DMX and is the answer not in the manual?
General| Brand | Flowserve |
|---|---|
| Model | DMX |
| Category | Water Pump |
| Language | English |
General information and essential instructions for operating the pump safely and correctly.
Details regarding CE marking directives and approvals applicable to the equipment.
Information disclaimer concerning the manual's completeness and accuracy.
Copyright notice for the user instructions manual.
Guidelines for selecting the pump based on specific application duty conditions.
Comprehensive safety guidelines, including hazard warnings and personal protective equipment recommendations.
Explanation of safety symbols, warning labels, and their critical meanings for safe operation.
Information on accessing specific machine performance data and customer data sheets.
Guidance on noise exposure, measurement, and estimated noise levels for pumps.
Procedures and specifications for proper foundation grouting using various materials.
Detailed steps and methods for achieving and verifying shaft and coupling alignment.
Essential pre-operational checks including oil rings, piping, and general readiness.
Guidelines for making safe and compliant electrical connections by qualified personnel.
Recommended protection systems for pumps in hazardous areas or handling hazardous liquids.
Critical steps and checks required before the initial commissioning of the pump.
Step-by-step guide for the safe and correct initial start-up of the pump unit.
Procedures and precautions for operating the pump safely and efficiently.
Instructions for safely stopping and performing shutdown procedures for the pump.
Factors influencing pump performance under different hydraulic, mechanical, and electrical conditions.
Detailed procedure for safely dismantling the pump rotor assembly.
Specific instructions and precautions for heating impellers during removal.
Guidelines for inspecting and examining pump components after dismantling.
Detailed steps for inspecting parts for wear and determining renewal needs.
Procedures for reassembling the pump, including bearings and sealing systems.
Correct methods and precautions for installing ball bearings onto the shaft.
