EP5 Electro Pneumatic Digital Positioner FCD PMENIM0006-00-A5 12/18
3
Warning!
Special Conditions for Safe Use
The enclosure is made of aluminum and impact or friction caused by external objects
shall be avoided in the application.
Rubbing of the windows with dry fabrics shall be avoided when the positioner is used in
an IIC atmosphere in order to avoid potentially incendive static discharges.
The ambient temperature range for the positioner is -20˚C <Ta 85˚C
The I/P converter has to be installed in an enclosure that satisfies the following clauses:
Complies with ”electrostatic charge” requirements in EN 60079-0, clause 7.4
A suitable degree of protection minimum IP20 according to 6.1 in EN 60079-11
Shall not contain by mass, more than, 7.5% in total of magnesium according to clause 8.1
in EN 60079-0
According to descriptive document: IP-653.
Shall withstand dielectric strength test with 500V AC for 1 minute according 6.3.12 in EN
60079-11.
To Next Page
Loading...
Need help?
General
