USER INSTRUCTIONS POLYCHEM GRP ENGLISH 71569132 12-04A
Page 3 of 52 flowserve.com
INDEX
Page
Additional sources (10.3) ....................................... 51
Alignment (see 4.3, 4.5 and 4.8)
Assembly (6.10) ..................................................... 40
ATEX marking (1.6.4.2) ............................................ 7
CE marking and approvals (1.2) ............................... 4
Certification (9) ...................................................... 51
Change notes (10.2) .............................................. 51
Clearances, impeller (6.7) ...................................... 34
Commissioning and operation (5) ........................... 24
Compliance, ATEX (1.6.4.1) ..................................... 7
Configurations (3.1) ............................................... 11
Copyright (1.4) ......................................................... 4
Design of major parts (3.3) ..................................... 12
Direction of rotation (5.4) ........................................ 27
Disassembly (6.8) .................................................. 35
Disclaimer (1.3)........................................................ 4
Dismantling (6.8, Disassembly) .............................. 35
Drawings (8) .......................................................... 48
Duty conditions (1.5) ................................................ 4
Electrical connections (4.7) .................................... 23
End of product life (2.5) .......................................... 11
Examination of parts (6.9) ...................................... 38
Fastener torques (6.6)............................................ 33
Faults; causes and remedies (7) ............................ 45
Foundation (4.3) .................................................... 13
General arrangement drawing (8.4) ........................ 51
General assembly drawings (8) .............................. 48
Grouting (4.4) ........................................................ 15
Guarding (5.5) ....................................................... 27
Handling (2.2) ........................................................ 10
Hydraulic, mechanical and electrical duty (5.10) ..... 30
Impeller clearance (see 5.3 and 6.7)
Inspection (6.2.1 and 6.2.2) .................................... 32
Installation (4) ........................................................ 13
Lifting (2.3)............................................................. 10
Location (4.1) ......................................................... 13
Lubrication (see 5.2) .............................................. 24
Maintenance (6) ..................................................... 31
Maintenance schedule (6.2) ................................... 32
Name nomenclature (3.2)....................................... 11
Nameplate (1.7.1) .................................................... 8
Operating limits (see 3.4) ....................................... 12
Ordering spare parts (6.3.1) ................................... 32
Part assemblies (4.2) ............................................. 13
Parts lists (see 8) ................................................... 48
Performance (3.4) .................................................. 12
Piping (4.6) ............................................................ 17
Pre-commissioning (5.1) ........................................ 24
Priming and auxiliary supplies (5.6) ........................ 28
Protection systems (4.9) ........................................ 23
Page
Reassembly (see 6.10, Assembly) ......................... 40
Receipt and unpacking (2.1) .................................. 10
Recommended fill quantities (figure 5-2) ................ 25
Recommended oil lubricants (figure 5.3) ................ 25
Recommended spares (6.4) .................................. 33
Recycling (2.5) ...................................................... 11
Replacement parts (see 6.3 and 6.4) ................. 32/33
Running the pump (5.8) ......................................... 29
Safety action (1.6.3) ................................................ 5
Safety labels (1.7.2) ................................................ 8
Safety markings (1.6.1) ........................................... 5
Safety, protection systems (see 1.6 and 4.9)
Sectional drawings (8) ........................................... 48
Setting impeller clearance (6.7) ............................. 34
Sound pressure level (1.9, Noise level) .................... 9
Sources, additional information (10.3) .................... 51
Spare parts (6.3) ................................................... 32
Specific machine performance (1.8) ........................ 9
Starting the pump (5.7) .......................................... 29
Stopping and shutdown (5.9) ................................. 30
Storage, pump (2.4) .............................................. 10
Storage, spare parts (6.3.2) ................................... 32
Supplementary manuals or information sources..... 51
Supplementary User Instructions (10.1) ................. 51
Tools required (6.5) ............................................... 33
Torques for fasteners (6.6) .................................... 33
Trouble-shooting (see 7) ....................................... 45
Vibration (5.8.8) ..................................................... 30
To Next Page
Loading...
Need help?
General
