FGM 160 Operating Instructions
The FGM 160 is certified for operation in Hazardous Area.
For detailed information regarding Hazardous Area installation and operation, please refer to
Fluenta Doc. no. 62.120.006 (Hazardous Area Installation Guidelines [1]) and 75.120.215
(FGM 160 Hazardous Area Certificates [2]).
Figure 2: FGM 160 Hook-Up, with the Field Computer, Ultrasonic Transducers, Pressure and Temperature
Transmitters, and connections to Safe Area equipment.
3.1.1 Electrical Connections
For detailed information regarding all electrical connections, please refer to Installation & Hook-
Up Instructions [3].
3.1.2 Power Supply
The FGM 160 requires 24 VDC power supply (nominal). If 24 VDC is not available, an optional
110-230 VAC/24 VDC converter can be supplied by Fluenta.
For detailed equipment information and equipment ratings, please refer to Hazardous Area
Installation Guidelines [1].
3.1.3 Input Signals
3.1.3.1 Ultrasonic Transducers
FGM 160 ultrasonic transducers are connected to the FGM 160 Field Computer by means of
prefabricated signal cables included.
To Next Page
Loading...
