FGM 160 Operating Instructions
3.4 Configuration and Operating Software
Through the FGM 160 Ultrsonic Flare Meter Manager (UFM Manager), the operator can
monitor process data, configure the meter and specify process data to be saved to a data log
file for later analysis. UFM Manager further enables the operator to operate the meter remotely,
by using e.g. a RS 485/TCP/IP converter and remote control software.
It should be noted, UFM Manager is required to replace the default settings with actual
applicable settings provided by customer. Fluenta service engineers and partners will always
set up the FGM 160 according to the latest submitted parameters from the Client when
installing and commissioning the FGM 160. Fluenta service engineers and partners always
have the UFM Manager with them.
To Next Page
Loading...
