fluenta FGM 160 - 6 Appendix I - System Configuration File

FGM 160 Operating Instructions
72.120.601
Page 14 of 27
EXAMPLE
6. APPENDIX I – SYSTEM CONFIGURATION FILE
********************************************************
********************************************************
****************** ***************
****************** Fluenta AS ***************
****************** FGM 160 parameter list ***************
****************** ***************
********************************************************
********************************************************
UFM Manager ver.: 1.040
Field Computer, date and time: 2011-01-17 09:13:25
***************************************
********** System Parameters **********
***************************************
Field Computer Type: FGM 160
Serial number: 2006-0102
Tag number: 1-TAG-1
Company: FLUENTA AS
Installation: Sandbrekkeveien 85
Description: 10" LP Flare
System Configuration: Single system (ch1)
Local Display: Not installed <- You have to change it manually
SW Version DSP: 0.052 to version number that is installed
SW-app Version I/O: 1.007 using AVR Studio
SW-boot Version I/O: 0.006
SW-app Version P&T: 0.257
SW-boot Version P&T: 0.005
*******************************************
********** Communication Parameters **********
*******************************************
**************** DCS communication **********
------------------------------------------------------------
DCS Modbus Communication: Enabled
Slave address: 224
Type: RTU
Baud rate: 38400
Data bits: 8
Parity: No Parity
Stop bit: 2
Register Values: 32 bit floating point (IEEE-754)
Register size in request: 32 bits
Register base address: 1000
***************** HART communication **********
---------------------------------------------------------------