Fluid FLD2600 - Operating Your Television; Channel Menu Options and Signal Status

18
Operating Your Television
Channel Menu Options
Press MENU on the side panel or remote control, then use / to select the CHANNEL menu.
Press or OK to enter (see picture).
Air/Cable
Allows you to select the input signal between Air and Cable.
If you select “Air” as the input signal in the “Antenna” option
press the button to search the channels automatically.
The receiver channels will be stored automatically.
When searching channels, press MENU to stop.
If you select “Cable” as the input signal in the “Antenna” option, this
allows you to select the Cable System between: Auto, STD, IRC and HRC.
Use the button to highlight “Start to Scan”, then press the button
to search the channels automatically. The receivable channels will be
stored automatically.
When searching channels, press MENU to stop.
Auto Scan
Use the button to highlight “Auto Scan”, then press the button to enter
into the menu.
Favourite
Allows you to add any channels that you flag to your favourite channel list.
Use the
/
button to highlight the “Favourite” channel, then press the
button to enter the menu.
Use the
/
button to highlight the desired channel, then press the OK
button to add or remove the highlighted channel as a favourite.
Show/Hide
Allows you to show or hide the channels.
Use the
/
button to highlight the “Show/Hide” item,
then press the button to enter the menu.
Use the
/
button to highlight the desired item, then
press the OK button to show or hide the highlighted channel.
Channel No.
Displays the number of the current channel.
Channel Label
Displays the label of the current channel.
DTV Signal
Displays the quality of the current DTV signal.