10 Users Manual
14
Maintenance
W Warning
To avoid electrical shock or damage to the meter, do not get water inside the
case, and remove the test leads and any input signals before opening the case.
Wipe the case with a damp cloth and detergent.
Do not use abrasives or solvents.
Replacing the Battery
W Warning
Replace the battery as soon as the low battery indicator (
N
) appears to avoid
false readings that can lead to shock and injury.
To replace the battery:
1. Turn the meter
OFF
and remove the test leads from the meter.
2. Remove the four screws from the back of the meter and lift off the front.
3. Remove the battery and replace it with a 9 V battery (NEDA 1604 or IEC 6F22).
To Next Page
Loading...
Need help?
General
