Fluke 110 PLUS - Terminals

True-rms Multimeters
Terminals
7
Terminals
10 A
FUSED
COM
V
A
1
2
3
edy01f.eps
No. Description
Model
 Input terminal for measuring ac and dc current to 10 A. 115
 Common (return) terminal for all measurements. 110 PLUS, 115

Input terminal for measuring voltage, continuity, resistance, capacitance, frequency and
testing diodes.
110 PLUS, 115
Error Messages

Battery must be replaced before the Meter will operate.
 
Calibration required. Meter calibration is required before the Meter will operate.
 
Internal error. The Meter must be repaired before it will operate.
- 
Internal error. The Meter must be repaired before it will operate.