110 PLUS and 115
Users Manual
2
Safety Information
A Warning identifies conditions and procedures that are dangerous to the user. A Caution identifies conditions and procedures that can
cause damage to the Product or the equipment under test.
XW Warning
To prevent possible electrical shock, fire, or personal injury:
• Read all safety information before you use the Product.
• Carefully read all instructions.
• Do not use the Product around explosive gas, vapor, or in damp or wet environments.
• Comply with local and national safety codes. Use personal protective equipment (approved rubber gloves,
face protection, and flame-resistant clothes) to prevent shock and arc blast injury where hazardous live
conductors are exposed.
• Examine the case before you use the Product. Look for cracks or missing plastic. Carefully look at the
insulation around the terminals.
• Do not use test leads if they are damaged. Examine the test leads for damaged insulation and measure a
known voltage.
• Limit operation to the specified measurement category, voltage, or amperage ratings.
• Use the correct terminals, function, and range for measurements.
• Do not touch voltages > 30 V ac rms, 42 V ac peak, or 60 V dc.
• Do not exceed the Measurement Category (CAT) rating of the lowest rated individual component of a
Product, probe, or accessory.
• Use Product-approved measurement category (CAT), voltage, and amperage rated accessories (probes,
test leads, and adapters) for all measurements.
To Next Page
Loading...
