Fluke 125 - General Operating Instructions; Powering the Test Tool

Getting Started
Plotting Measurements over Time (TrendplotTM)
15
Plotting Measurements over Time
(Trendplot
TM
)
The TrendPlot™ function plots a graph derived from the
MAIN (large) readings in the SCOPE/METER mode or in
the HARMONICS mode as a function of time.
Turning the Trendplot Mode On/Off
Open the application mode menu.
Highlight TRENDPLOT
Start a Trendplot.
Trendplot Screen Softkey Functions
Stop the Trendplot.
TREND RESTART: Start a new Trendplot.
MIN MAX AVERAGE: Secondary (small)
reading is the minimum, maximum, or
average value since the Trendplot start.
CURSOR ON OFF: Turn cursor
measurements on/off (only possible if
screen is frozen). See also Making Cursor
Measurements on page 9.