Fluke 1550C Calibration Manual

1
Introduction
Warning
To prevent possible electrical shock, fire, or personal injury:
• Do not perform the verification tests or calibration
procedures described in this manual unless qualified to do
so.
• Read all safety Information before you use or service the
product.
The Calibration Manual for the 1550C/1555Insulation Tester (hereafter referred to as
"the product") provides the following information.
• Fluke Contact Information
• Precautions and Safety Information
• Performance Test Procedures
• Adjustment Procedure
• Battery Replacement Procedure
• Replaceable Parts/Accessories
• Specifications
For complete operating instructions and additional safety information, refer to the
1550C/1555Users Manual located on the CD that came with the product.

Fluke 1550C Specifications

General

Display type	-
Housing color	Grey, Yellow
Maximum voltage	5000 V
AC voltage range	250 - 5000 V
Operating altitude	0 - 2000 m
Overload protection	Yes
Storage temperature (T-T)	-20 - 65 °C
Operating temperature (T-T)	-20 - 50 °C
Operating relative humidity (H-H)	0 - 80 %
International Protection (IP) code	IP40
Battery technology	Sealed Lead Acid (VRLA)
Number of batteries supported	1

Weight and Dimensions

Depth	277 mm
Width	269 mm
Height	160 mm
Weight	3700 g