1623-2
Users Manual
8
Setup
Warning
Read the safety information before you power on the instrument. If
you have problems, see How to Troubleshoot.
Batteries
Warning
To prevent possible electrical shock, fire, or personal injury:
• The battery door must be closed and locked before you operate
the Product.
• Replace the batteries when the low battery indicator shows to
prevent incorrect measurements.
• Batteries contain hazardous chemicals that can cause burns or
explode. If exposure to chemicals occurs, clean with water and get
medical aid.
Warning
For safe operation and maintenance of the Product:
• Repair the Product before use if the battery leaks.
• Be sure that the battery polarity is correct to prevent battery
leakage.
To insert the batteries:
1. Switch off instrument, see Figure 2.
2. Disconnect all test leads.
3. Open battery compartment.
4. Insert batteries. Always replace the complete set of batteries.
5. Close battery compartment.
To Next Page
Loading...
