Earth/Ground Tester
Maintenance
29
Maintenance
If used and treated properly, the instrument needs no maintenance. To clean the
instrument, use only a moist cloth with some soap water or soft household detergent or
spirit. Avoid aggressive cleaning agents and solvents, such as trilene or chlorothene.
Service work must only be undertaken by trained qualified staff.
In all repair work care must be taken that the design parameters of the instrument are not
modified to the detriment of safety, that assembled parts correspond to the original
spares and that they are reassembled properly (factory state).
Warning
To prevent possible electrical shock, fire, or personal injury:
• Use only specified replacement parts.
• Have an approved technician repair the Product.
• The battery door must be closed and locked before you operate
the Product.
• Replace the batteries when the low battery indicator shows to
prevent incorrect measurements.
• Batteries contain hazardous chemicals that can cause burns or
explode. If exposure to chemicals occurs, clean with water and get
medical aid.
• Remove the input signals before you clean the Product.
Warning
For safe operation and maintenance of the Product:
• Repair the Product before use if the battery leaks.
• Be sure that the battery polarity is correct to prevent battery
leakage.
Calibration
One-year calibration intervals are recommended.
Service
If you suspect that the Tester has failed, review this manual to make sure you are
operating it correctly. If the meter still fails to operate properly, pack it securely (in its
original container if available) and forward it, postage paid, to the nearest Fluke Service
Center. Include a brief description of the problem. Fluke assumes NO responsibility for
damage in transit.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
