Fluke 28 II Ex Calibration Information

Digital Multimeter
Safety Information
3
• Do not use and disable the Product if it is damaged.
• Do not use the Product if it operates incorrectly.
• Do not use the Product in damp or wet environments.
• Keep fingers behind the finger guards on the probes.
• Measure for hazardous voltage without the Low-Pass Filter.
WCaution
To prevent possible damage to the Meter or to the equipment
under test, follow these guidelines:
• Disconnect circuit power and discharge all high-voltage
capacitors before you do resistance, continuity, diodes, or
capacitance tests.
• Use the correct terminals, function, and range for all
measurements.
• Before you measure current, check the fuses of the Meter.
(See Fuse Test.)

Fluke 28 II Ex Specifications

General

Diode test	Yes
Product type	Digital multimeter
Product color	Black, Red
Frequency range	0.0005 - 199.99 kHz
DC current range	0.0000001 - 10 A
DC voltage range	0.0001 - 1000 V
Resistance range	0.1 - 50000000 Ω
Measuring category	CAT IV 600V
Placement supported	Handheld multimeter
Basic accuracy (frequency)	0.005%
Basic accuracy (DC current)	0.2%
Basic accuracy (DC voltage)	0.05%
Temperature measurement range	-200 - 1090 °C
Battery type	AAA
Power source	Battery
Battery technology	Alkaline
Number of batteries supported	3
Operating altitude	0 - 2000 m
Maximum storage altitude	10000 m
Operating relative humidity (H-H)	0 - 80 %

Weight and Dimensions

Depth	198.1 mm
Width	100 mm
Height	6.35 mm
Weight	698.5 g