Wireless Multimeter
Basic Measurements
19
Volts/Hertz Ratio
The Product can show the ratio of volts to frequency of an
ac signal. Set the Product as shown in Figure 2 to show
Volts/Hertz ratio.
When the Product is set to the Volts/Hz function, the
voltage range is set to manual. If the voltage increases to
a value larger than the range, the Product shows OL in
the display. If the voltage drops to less than 5 % of the
range, the value shown in the display can be invalid. Set
the Product as shown in Figure 2 to measure volts/Hz.
Volts/Hz
Volt/Hzx 2
gxr011.eps
Figure 2. Volt/Hertz Ratio
To Next Page
Loading...
