Power Quality Clamp Meter
Safety Information
3
• Always connect the Battery Charger/Power Adapter first to
the ac outlet before connecting it to the Clamp Meter.
• Remove all probes, test leads and accessories not in use.
• Do not operate the Clamp Meter around explosive gas or
vapor.
• Do not exceed Clamp Meter input voltage or current
ratings.
• Do not use exposed metal BNC or banana plug connectors
or insert metal objects into connectors.
WCaution
To avoid damage to the Clamp Meter:
• Do not open the Clamp Meter for cleaning. Do not use
solvents to clean it, and do not immerse it in liquid.
• Only trained personnel should perform maintenance work.
Any such work undertaken by unauthorized personnel may
damage the Clamp Meter and will invalidate the warranty.
Tactile Barrier
fcs 001.eps
Figure 1. Tactile Barrier
To Next Page
Loading...
