345
Calibration Manual
14
Key Pad Check
To check the keypad, press each key and verify that each functions as expected.
Save and Clear Screenshots
To save screenshots:
1. Move the rotary switch to V.
2. Press E to save the screen.
3. Press E again to exit.
4. Repeat step 3 to save the screen twice.
5. Press M. View/Delete Screens is selected.
6. Press E. The saved screens appear in the list.
7. Press E to view the last screen saved.
To clear the screenshots:
1. Press Fto delete all screen shots
2. Press Gto delete one at a time.
Language Set
The default language for the Clamp Meter is English. To change the language:
1. Press M.
2. Use J to move to Language….
3. Press E.
4. Use Jand Kto select desired language.
5. Press Eto save the choice.
To Next Page
Loading...
