Power Quality Clamp Meter
Cleaning and Maintenance
11
Cleaning and Maintenance
WCaution
To avoid damage to the Clamp Meter, do not apply solvents to
the case.
The Clamp Meter contains no user serviceable parts. Contact an Authorized Fluke
Service Center for repair. See “Contacting Fluke”.
Periodically wipe the case with a damp cloth and mild detergent. Do not use abrasives or
solvents.
Change the batteries when e appears.
To change the batteries, see Figure 3:
1. Remove all inputs from the Clamp Meter and the clamp from stimuli.
2. Turn the Clamp Meter off.
3. Turn the Clamp Meter over and use a flat-head screwdriver to remove the two battery
door screws.
4. Replace the six batteries with new AA LR6 batteries.
5. Reattach the battery door and tighten the screws.
To Next Page
Loading...
