345
Calibration Manual
2
Contacting Fluke
To contact Fluke, call:
1-888-993-5853 in USA
1-800-363-5853 in Canada
+31-402-675-200 in Europe
+81-3-3434-0181 in Japan
+65-738-5655 in Singapore
+1-425-446-5500 from anywhere in the world
Or, visit Fluke’s Web site at www.fluke.com
To register your product, visit http://register.fluke.com
Safety Information
In this manual, a Warning identifies conditions and actions that pose hazard(s) to the
user. A Caution identifies conditions and actions that may damage the test instrument.
The design and manufacture of the device conforms to the latest state of technology and
the safety standards specified in IEC 61010-1/ 2
nd edition. If used improperly, there is a
risk of damage to persons and property.
XWWarning
To avoid possible electric shock or personal injury, follow these
guidelines:
• Use the Clamp Meter only as specified in this manual or the
protection provided by the Clamp Meter might be impaired.
• Use caution when working with voltages above 33 V acrms,
46.7 V ac peak, or 70 V dc. These voltages pose a shock
hazard.
• When using probes, keep your fingers behind the finger
guards.
• Replace the batteries as soon as the low battery indicator
(
e) appears to avoid false readings that can lead to
electric shock and injury.
• Adhere to local and national safety codes. Individual
protective equipment must be used to prevent shock and
arc blast injury where hazardous live conductors are
exposed.
• Do not hold the Clamp Meter anywhere beyond the tactile
barrier, see Figure 1.
• Before use, inspect the Clamp Meter, voltage probes, test
leads, and accessories for mechanical damage, and
replace if damaged. Look for cracks or missing plastic. Pay
special attention to the insulation surrounding the
connectors.
• Avoid working alone when working with live circuits.
• Use only insulated test leads and adapters as supplied with
the Clamp Meter, or indicated as suitable for the Clamp
Meter.
To Next Page
Loading...
