Getting Acquainted with Your Tester
7
Getting Acquainted with Your Tester
While referring to Figure 3, perform the following key presses to familiarize
yourself with basic tester operations.
1.
o
to turn the Tester on.
2.
c
(brief press) and
<
or
>
to change screen contrast.
C
(hold 1 second) to turn the backlight on or off.
3.
F
to select a measurement function (Volts, Amps, Watts).
4.
M
to select a screen mode (Waveform, Harmonics, Text ).
5.
R
to start recording measurements
<
or
>
to select NOW, MAX, AVG, MIN recording.
F
to select a different measurement function while recording.
R
to exit recording.
6.
o
to turn the Tester off.
To Next Page
Loading...
Need help?
General
