39/41B
Users Manual
38
3. To exit the screen, press
E
to select a highlighted item on the last line
and store all selections you have made during this configuration session.
The Tester begins normal operation using these selections. The Tester
also automatically sets up to these selections at the next power-up.
To exit the screen without making changes, press
E
to cycle through
all selection lines.
4. To restore the standard configuration, press
R
as you press
O
on.
(On Model 41B, this action also clears waveform memory.)
a16c.eps
Figure 17. Configuration Screens
To Next Page
Loading...
