53 & 54 Series II
Using the Thermometer
9
Using the Thermometer
1. Plug the thermocouple(s) into the input connector(s).
2. Press A to turn on the thermometer.
After 1 second the thermometer displays the first reading.
If no thermocouple is plugged into the selected input or the
thermocouple is "open," the display shows
"- - - -."
Changing Setup Options
Use Setup to change the logging interval, thermocouple
type, offset, sleep mode, time, and line frequency settings.
The thermometer stores the settings in its memory. Setup
settings reset only when the batteries are removed for
more than 2 minutes.
Entering and Exiting Setup
When the thermometer is in Setup mode, the display
shows s.
• Press
D to start or exit Setup.
Notes
Press
K
or
N
to scroll to the setup option you
want to change.
Setup is disabled in MIN MAX mode.
To Next Page
Loading...
