53 & 54 Series II
Using Memory
17
Clearing Memory
When memory is full, FULL appears on the display and
logging stops. You can clear memory in normal or MIN
MAX mode.
• Press G, J (CLEAR MEMORY) to delete
logged readings from memory.
The display shows the following for 2 seconds.
MEMORY
cW f
Viewing Logged Readings
1. Press r to view logged readings.
The display shows R.
2. Press
K or N to scroll through the logged
readings.
The display shows each logged reading, its time
stamp, and its memory location. For example, Figure
3 shows the logged reading stored at 2:02 PM in
memory location 18.
aat03f.eps
Figure 3. Logged Reading
To Next Page
Loading...
