mA Loop Calibrator
Symbols
3
Symbols
Symbols used on the Product and in this manual are explained in Table 1.
Table 1. Symbols
Symbol Meaning Symbol Meaning
Earth ground
Conforms to relevant North American
Safety Standards.
AC- alternating current
Conforms to European Union
directives.
DC- direct current
Conforms to relevant Australian
standards.
Risk of danger. Important
information. See manual.
This product complies with the WEEE
Directive (2002/96/EC) marking
requirements. The affixed label
indicates that you must not discard
this electrical/electronic product in
domestic household waste. Product
Category: With reference to the
equipment types in the WEEE
Directive Annex I, this product is
classed as category 9 "Monitoring and
Control Instrumentation” product. Do
not dispose of this product as
unsorted municipal waste. Go to
Fluke’s website for recycling
information.
Hazardous voltage. Risk of
electrical shock.
Examined and licensed by TÜV
Product Services.
Battery.
Double insulated
*CAT II
Measurement Category II is
applicable to test and
measuring circuits connected
directly to utilization points of
low voltage mains
installation.
*CAT III
Measurement Category III is
applicable to test and measuring
circuits connected to the distribution
part of the building’s low-voltage
MAINS installation.
*CAT IV
Measurement Category IV is applicable to test and measuring circuits connected at the
source of the building’s low-voltage MAINS installation.
*CAT ratings apply to the handheld accessories only. The Product is rated to 30 V maximum.
To Next Page
Loading...
