Fluke 725Ex Calibration Manual

®
725Ex
Multifunction Process Calibrator
Calibration Manual
PN 2406553
January 2005 Rev. 1, 5/09
© 2005, 2009 Fluke Corporation. All rights reserved. Printed in USA. Specifications are subject to change without notice.
All product names are trademarks of their respective companies.

Fluke 725Ex Specifications

General

Safety Rating	Intrinsically Safe
Power Supply	Four AA alkaline batteries
Operating Temperature	-10°C to 50°C
Voltage DC	0 to 30 V
Current DC	0 to 24 mA
HART Communication	Yes
Intrinsically Safe	Yes
Voltage Range	0 to 30 V
Current Range	0 to 24 mA
Storage Temperature	-20°C to 60°C
Type	Process Calibrator
Measurement Functions	Frequency
Source Functions	Frequency
Display	LCD
Loop Power Supply	24 V
Thermocouple Types	J, K, T, E, R, S, B, N
RTD Types	Pt100, Pt200, Pt500, Pt1000, Cu10, Cu50, Cu100, Ni120
Pressure	Requires pressure module
Pressure Range	Depends on pressure module
Frequency Range	0 to 10 kHz
Communication Interface	HART
Safety Certification	ATEX, CSA
Dimensions	130 mm x 236 mm x 61 mm
Voltage DC Accuracy	±(0.02% + 2 counts)
Current DC Accuracy	±(0.02% + 2 counts)