744
Users Manual
98
Communicating with a PC
You can upload and download procedures and
saved results to a PC. An IBM PC
TM
-compatible
personal computer, Microsoft Windows, and Fluke
DPC/TRACK
software, or a qualified Fluke partner’s
software are required. A custom serial interface
cable for the calibrator is included with
DPC/TRACK
.
Refer to the
DPC/TRACK Users Manual
for further
instructions.
Maintenance
Note
Additional maintenance instructions,
including a calibration procedure and a list of
replaceable parts is available in the 74X
Series Calibration Manual (PN 602505).
Replacing the Battery Pack
Replace the battery pack when it no longer holds a
charge for the rated interval. The battery normally
lasts for up to 1000 charge/discharge cycles. To
order a replacement battery, order Model BP7235
Nickel-Metal Hydride or Model BP7217 Nickel-
Cadmium Battery Pack. In the USA and Canada call
Fluke Service Parts at 1-800-526-4731. Outside the
USA and Canada call +1 425-356-5500.
Note
N
Do not mix spent Nickel-Cadmium
batteries with the solid waste stream. Spent
batteries should be disposed of by a
qualified recycler or hazardous materials
handler. Contact your authorized Fluke
Service Center for recycling information.
To Next Page
Loading...
