Need help?Do you have a question about the Fluke 74X Series and is the answer not in the manual?
General| Category | Test Equipment |
|---|---|
| Type | Documenting Process Calibrator |
| Manufacturer | Fluke |
| Storage Temperature | -20 °C to 60 °C |
| DC Current Range | 0 mA to 24 mA |
| Measurement Parameters | Voltage, Current, Temperature, Frequency, Pressure |
| Display | LCD |
| Power Supply | Rechargeable battery |
| Operating Temperature | -10 °C to 50 °C |
| Humidity | 10% to 90% non-condensing |
| Loop Power | 24 V DC |
| Thermocouple Types | J, K, T, E, R, S, B, N, C |
| RTD Types | Pt100, Pt500, Pt1000, Ni120 |
| Frequency Accuracy | ±0.01% of reading |
| HART Compatibility | Yes |
Lists necessary equipment for performance verification.
General instructions for performing verification procedures.
Procedure for verifying DC Volts Measurement function.
Procedure for verifying AC Volts Measurement function.
Procedure for verifying DC Current Measurement function.
Procedure for verifying Resistance Measurement function.
Procedure for verifying Frequency Measurement function.
Procedure for verifying DC Volts Source function.
Procedure for verifying DC Current Source function.
Procedure for verifying Simulate Transmitter function.
Procedure for verifying Resistance Source function.
To Next Page
