744
Users Manual
102
Accessories
The Fluke accessories listed below are compatible
with the 744 calibrator. For more information about
these accessories and their prices, contact your
Fluke representative.
•
Fluke-700SW DPC/TRACK application software
for Microsoft Windows. DPC/TRACK provides
everything you need to interface the calibrator
with a PC-compatible computer. With
DPC/TRACK, you can compose and load tasks
(procedures), unload results, generate reports,
and create an instrument calibration database.
•
Fluke-700BCW Bar Code Wand
•
Fluke-700-IV Current Shunt, for simultaneous dc
current sourcing and measuring.
•
Pressure Modules, Fluke model numbers listed
below. (Differential models also operate in gage
mode.) Contact your Fluke representative about
new pressure modules not listed here.
Fluke-700P01: 0 to 10” H
2
O (differential, dry)
Fluke-700P02: 0 to 1 psi (differential, dry)
Fluke-700P22: 0 to 1 psi (differential, wet)
Fluke-700P03: 0 to 5 psi (differential, dry)
Fluke-700P23: 0 to 5 psi (differential, wet)
Fluke-700P04: 0 to 15 psi (differential, dry)
Fluke-700P24: 0 to 15 psi (differential, wet)
Fluke-700P05: 0 to 30 psi (gage, wet)
Fluke-700P06: 0 to 100 psi (gage, wet)
Fluke-700P07: 0 to 500 psi (gage, wet)
Fluke-700P08: 0 to 1,000 psi (gage, wet)
Fluke-700P09: 0 to 1,500 psi (gage, wet)
Fluke-700P29: 0 to 3,000 psi (gage, wet)
Fluke-700P30: 0 to 5,000 psi (gage, wet)
Fluke-700P31: 0 to 10,000 psi (gage, wet)
To Next Page
Loading...
