Documenting Process Calibrator
Standard Equipment
3
Standard Equipment
The items listed below and shown in Figure 1 are
included with your calibrator. If the calibrator is
damaged or something is missing, contact the place
of purchase immediately. To order replacement
parts or spares, see the user-replaceable parts list
at the end of this manual.
•
TL24 industrial test leads (two sets)
•
AC20 test clips (two sets)
•
TP20 test probes (one set)
•
HART interface cable
•
BP7235 rechargeable nickel-metal hydride pack
•
BC7217 battery charger with Instruction Sheet
•
Adjustable quick-release strap (PN 946769)
•
Jumper for three-wire RTD measurement
connections (two included, PN 944632)
•
744 Users Manual
English (PN 691287)
French (PN 691300)
German (PN 691311)
Italian (PN 691318)
Spanish (PN 691303)
•
744
HART
Mode Users Guide
English (PN 691292)
French (PN 691326)
German (PN 691334)
Italian (PN 691337)
Spanish (PN 691329)
•
DPC/TRACK
Software utility version with
interface cable (9-pin male-female straight-
through, PN 943738).
To Next Page
Loading...
