10 80i-110s Instruction Manual
SAFETY SPECIFICATIONS
Designed to meet the requirements of IEC 1010 and CSA-C22.2 No. 1010.1:
Installation Category II, Working Voltage 600V, Pollution Degree 2,
Installation Category III, Working Voltage 300V, Pollution Degree 2
Installation (Overvoltage ) Category II refers to local level, appliances, and portable
equipment. Installation (Overvoltage) Category III refers to distribution level and
fixed installation circuits inside a building electrical service entrance.
Designed to meet the requirements of UL3111-1, Protection Class II Double
Insulation .
Meets requirement of EN 61010-1.
This product is in conformity with Electromagnetic Compatibility Directive
89/336/EEC, and low Voltage Directive 73/23/EEC.
This conformity is indicated by the symbol , i.e. “Conformité européenne”.
BATTERY INFORMATION
Battery:
9 volt, IEC 6LR61
Consumption:
8.6 mA typical
12 mA maximum
Service life:
55 hours typical, when Alkaline IEC 6LR61 is used
40 hours minimum, when Alkaline IEC 6LR61 is used
Battery indicator (ON):
Green LED dims when battery voltage is below 6.5V
Overload indicator (OL):
Red LED indicates that waveform or impulse is out
of range
To Next Page
Loading...
