Fluke 810 - Viewer Software System Requirements

810
Getting Started
20
System Requirements
The minimum PC system requirements to use the Viewer
software are:
• Microsoft Windows 2000 / Windows XP SP2
/Windows Vista Operating system
• Minimum 1 GB RAM
• One USB port
• CD-ROM disk drive
PC Connections
To connect the computer to the Tester:
1. Power on the computer and the Tester.
2. Connect the USB cable to the USB ports of the
computer and the Tester as shown in Figure 7.
See the marking on the ends of the cable for
identifying the Type-A and Mini-B ends.
3. Install the supporting software and Viewer
software (if not installed already). See “Install the
Viewer Software” on the CD-ROM.