Using Save, Recall, Print, and Set Up
Changing the Configuration
6
6-9
Table 6-1. Configuration Selections (SET UP)
SET UP ITEM SELECTIONS AVAILABLE DEFAULT
LCD Contrast Press
<
or
>
to adjust display contrast. (mid-range)
AC Converter “rms” or “Average”. This setting controls “rms” or “Average” softkey selection
in ac volts or amps functions.
True rms
Display Mode “Combo” or “Meter”. Combo
dB Reference dB ohms reference values: 2 4 8 16 50 75 93 110 125 135 150 300 600
900 1000 1200. Continue pressing
>
to select “Auto”, “Manual”, or “Disabled”.
600
Ω
Range “Auto” or “Manual”. Auto
Beeper “Enabled” or “Disabled”. Enabled
Sleep Mode “Enabled” or “Disabled”. Enabled
Trigger Mode “Dual” or “Single”. Dual
Printer Type “Epson”, “HP Graphics”, or “Text.” Epson
Baud Rate 1200, 2400, 9600, or 19200. 1200
Parity “no”, “even”, or “odd”. (Number of Bits is always 8; number of Stop Bits is
always 1.)
none
To Next Page
Loading...
