Fluke 87V Ex - Introduction; Contacting Fluke

1
Introduction
XW Warning
To avoid shock or injury:
• Read “Precautions and Safety Information” before
performing the verification tests or calibration adjustment
procedures documented in this manual.
• Do not perform the verification tests or calibration
adjustment procedures described in this manual unless you
are qualified to do so.
• The information provided in this manual is for the use of
qualified personnel only.
WCaution
• The 87V EX True-rms Multimeter contains parts that can be
damaged by static discharge.
• Follow the standard practices for handling static sensitive
devices.
The 87V EX Calibration Manual provides the following information:
• Safety information
• Specifications
• Basic maintenance (cleaning, replacing the battery and fuses)
• Performance test procedures
• Calibration adjustment procedures
• Replaceable parts
For complete operating instructions, refer to the 87V EX True-rms Multimeter Users
Manual.
Contacting Fluke
To contact Fluke or locate the nearest Service Center, call one of the following telephone
numbers:
Europe: +31 402-675-200
Or, visit Fluke's Web site at www.fluke.com
.
To register your product, visit register.fluke.com
XWWarning
To avoid possible electric shock or personal injury, inspect the
test leads for damaged insulation or exposed metal. Check the
test leads for continuity. Replace damaged test leads before
using the Meter.