Fluke 8845A - Measurement Commands

8845A/8846A
Programmers Manual
32
Table 12. Measurement Configuration Command Summary (cont.)
Command
[1]
Description
:RANGe {<range>|MINimum|MAXimum}
:AUTO {OFF|ON}
:AUTO?
:RANGe? [MINimum|MAXimum]
:RESolution {<resolution>|MINimum|MAXimum}
:RESolution? [MINimum|MAXimum}
FRESistance
:FILTer
:STATe {OFF|ON}
:STATe?
:DIGItal
[:STATe]{OFF|ON}
[:STATe]?
:NPLCycles {0.02|0.2|1|10|100|
MINimum|MAXimum}
:NPLCycles? [MINimum|MAXimum]
:RANGe {<range>|MINimum|MAXimum}
:AUTO {OFF|ON}
:AUTO?
:RANGe? [MINimum|MAXimum]
:RESolution {<resolution>|MINimum|MAXimum}
:RESolution? [MINimum|MAXimum}
FREQuency
:APERture {0.01|0.1|1|MINimum|MAXimum}
:APERture? [MINimum|MAXimum]
:VOLTage
:RANGe {<range>|MINimum|MAXimum}
:AUTO {OFF|ON}
:AUTO?
:RANGe? [MINimum|MAXimum]
PERiod
:APERture {0.01|0.1|1|MINimum|MAXimum}
:APERture? [MINimum|MAXimum]
:VOLTage
:RANGe {<range>|MINimum|MAXimum}
:AUTO {OFF|ON}
:AUTO?
:RANGe? [MINimum|MAXimum]
CAPacitance
:RANGe {<range>|MINimum|MAXimum}
:AUTO {OFF|ON}
:AUTO?
:RANGe? [MINimum|MAXimum]
:RESolution {<resolution>|MINimum|MAXimum}
:RESolution? [MINimum|MAXimum}
TEMPerature
:RTD
:ALPHa <alpha value>
:ALPHa?
:NPLCycles {0.02|0.2|1|10|100|
MINimum|MAXimum}
Set resistance measurement range
Disable/enable Autoranging
Retrieve present autorange setting
Retrieve the present range setting
Set resolution for resistance measurement
Retrieve resistance measurement resolution
Path to 4–wire resistance measurement range
Path to abalog filter
Set analog filter off or on
Retrieve the present analog filter setting
Path to digital filter
Activates or deactivates digital filter
Retrieve the present digital filter setting
Set integration time for selected function
Retrieve integration time for selected function
Set resistance measurement range
Disable/enable Autoranging
Retrieve present autorange setting
Retrieve the present range setting
Set resolution for resistance measurement
Retrieve resistance measurement resolution
Path to frequency measurement range
Set aperture time for frequency function
Retrieve aperture time for frequency function
Path to frequency range configuration
Set frequency measurement range
Disable/enable Autoranging
Retrieve present autorange setting
Retrieve the present range setting
Path to period measurement range
Set aperture time for period function
Retrieve aperture time for period function
Path to period range configuration
Set period measurement range
Disable/enable Autoranging
Retrieve present autorange setting
Retrieve the present range setting
Path to capacitance measurement range
Set capacitance measurement range
Disable/enable Autoranging
Retrieve present autorange setting
Retrieve the present range setting
Set resolution for capacitance measurement
Retrieve capacitance measurement resolution
Path to temperature measurement
Path to 2-wire temperature measurement
Set RTD alpha parameter
Retrieve the present RTD alpha parameter
Set integration time for selected function