Fluke LinkRunner Pro User Manual

Other Features
Restore Factory Defaults: Press the left and right arrow keys while powering up the unit.
Accessories
Buy LinkRunner Pro accessories, options, or other network test products by contacting a Fluke Networks
representative or send e-mail to: sales@flukenetworks.com. For more information go to
www.flukenetworks.com/linkrunnerpro.
Accessories Part No.
IntelliTone Pro Toner Probe (receiver) MT-8200-63A
Wireview
TM
Office Locator (ID #1) WIREVIEW 1
Wireview
TM
Office Locator (IDs # 2-6) WIREVIEW 2-6
Clip Set CLIP-SET
RJ-45 Coupler CIQ-RJA
Lithium ion battery pack and AC adapter
LRPRO-LION
Contacting Fluke Networks Sales, Service, and Support Centers
To order accessories or get the location of the nearest Fluke Networks distributor or service center, visit the Fluke
Networks contact website at www.flukenetworks.com/contact. Send email to support@flukenetworks.com. For
operator assistance in the USA, call 1-800-28-FLUKE (1-800-283-5853). You can also visit the Fluke Networks
Knowledge Base at http://kb.flukenetworks.com.
Agency Certification and Approval
)
Canadian Standards Association certified to Canadian and US standards
;
N10140
Meets C-Tick EMC standard, N10140, complies with FCC Part 15 Class A
P
Conforms to European Union Directives Pollution Degree 2
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Fluke LinkRunner Pro Specifications

Operating Environment

operating temperature	10 – 40 degrees C
storage temperature	-20 to 60 degrees C
operating humidity	95% relative humidity (non-condensing)

Power

battery type	4 AA batteries
RJ-45 network port maximum voltage	100 V
tone generator digital tone frequency	500 KHz

Weight and Dimensions

weight with 4 AA Alkaline batteries	10 oz
weight with 4 AA LI batteries	8.4 oz
height	5.3 inches
width	3.1 inches
depth	1.3 inches