MicroMapper™
9
Technical Specifications
Connectors
M
ICROMAPPER main unit: RJ45 jack
Remote Identifier: RJ 45 jack
Pairs tested
1-2, 3-6, 4-5, 7-8, and shield
LED Display
Horizontal: 5 green LEDs for pairs and shield
display
(1 - 2, 3 - 6, 4 - 5, 7 - 8, and SHIELD)
Vertical: 6 red LEDs (TONER, SHORT, REVERSED,
MISWIRE, SPLIT PAIRS, and LOW BATTERY)
Cables test limit
Minimum: 15.75" (40cm); Maximum: 656’ (200 m)
Power
IEC 86-1 (1996-07) --- Primary Batteries - General
IEC 60086-2 (1997-07) --- Primary Batteries -
Specification Sheets
M
ICROMAPPER: requires four 1.5 AAA batteries. IEC :
LR03; Others : AAA, E92, 4003; JIS : AM 4 ; ANSI :
24A; 1.5 Volt (nominal)
Remote Identifier: No battery required
Dimensions
M
ICROMAPPER: 4.92" x 2.05" x 1.54" 1
125 mm x 52 mm x 39 mm
Remote Identifier: 1.87" x 1.12" x 0.87"
47mm x 28mm x 22mm
Weight
M
ICROMAPPER with Remote Identifier: 125 g
To Next Page
Loading...
